The MOBIAK THESEUS System is a fire suppression system, that is particularly useful for suppressing fires in hazards where an electrically non-conductive medium is required and where clean-up of other extinguishing agents is a problem.

The System uses FK-5-1-12 as extinguishing agent and is used to protect hazards that are enclosed. An enclosed hazard area will provide a means to contain the Agent.

By containing the FK-5-1-12 in the enclosure, when discharged it will establish and maintain an effective extinguishing agent concentration. Some typical hazards that can be protected are mentioned but are not limited to the following:

• Computer rooms
• Telecommunication switch gear
• Storages
• Vaults
• Process equipment
• Machinery spaces
• Historic buildings and museums
• All normally occupied or unoccupied electronic areas where equipment is either very sensitive or irreplaceable

FK-5-1-12 Agent is stored in steel pressure cylinders located in a safe and accessible location. Is pressurized with nitrogen to a pressure of 34,5 bar or 50 bar.

Is distributed and discharged into the area affected by fire through the pipework – a network of pipes, nozzles and discharge hoses.

Each nozzle is drilled with a specific fixed opening designed to deliver a uniform amount of extinguishing agent into the protected area.

The pressure cylinders are connected to the pipework or the manifold by means of flexible discharge hoses. Various types of devices are available to actuate the release of the FK-5-1-12 into the protected area in case of fire.

The MOBIAK THESEUS System can be actuated by detection and control equipment for automatic system operation along with providing local and remote manual operation as needed. Accessories are used to provide alarms, ventilation control, door closures, or other auxiliary shutdown functions.

Combines an environmentally safe extinguishing agent and specially developed components for a fast-extinguishing agent discharge. The resulting rapid-fire suppression reduces property damage to the lowest possible extent.

The Design of the MOBIAK THESEUS System is in accordance with, but not necessarily limited to, the recommendations of MOBIAK S.A. and the applicable requirements set forth in the latest editions of the following standards and guidelines:

• NFPA 2001 (2018): Standard on Clean Agent Fire Extinguishing Systems

• ISO 14520-1 and ISO 14520-5: Gaseous fire-extinguishing systems

System Design is supported via Certified Flow Calculation Program.

The MOBIAK Flow Calculation Software contains a calculation routine for predicting the flow of agent through a pipe net- work system. The calculation routine can be initiated when all the data necessary to describe the system has been input via the interface.